How to improve the sealing performance of filter seals

Check the seal:
Check the condition of the filter seal regularly to see if there are any problems such as wear, cracks or aging. If any problems are found, replace the new seal in time.

Clean the sealing surface:
Make sure the filter sealing surface is clean and free of oil or foreign matter. You can use an appropriate detergent to clean the sealing surface and wipe it dry with a clean cloth.

Apply lubricant appropriately:
Before installing the seal, you can apply lubricant appropriately to the seal and sealing surface. Lubricants can reduce the friction of the seal and improve the sealing effect. But be careful to use suitable lubricants to avoid incompatibility with the filter material.

Adjust the installation force:
When installing the filter, adjust the installation force appropriately to ensure good contact between the seal and the sealing surface. Do not install too tight or too loose to avoid crushing or failure to seal.

Replace the appropriate seal:
Choose the appropriate seal material and size to ensure that it matches the filter and the sealing surface. If you use an unmatched seal, it will result in poor sealing.

Regular inspection and maintenance:
Regularly check the status of the filter seal and perform maintenance. Timely detection and resolution of problems can ensure the normal operation and service life of the seal.