The reasons for the filter end cover to fall off

The main reasons for the filter end cover to fall off include the following:

1.Sealing ring is damaged or aged:
If the sealing ring of the filter end cover is damaged or aged, it will lead to poor sealing effect, and it will not fit the filter tightly, and eventually cause the end cover to fall off.

2.There are foreign objects in the joint:
If there are foreign objects stuck in the joint between the filter end cover and the filter, the cover will not fit tightly on the filter, causing the end cover to fall off.

3.Filter deformation or damage:
If the filter itself is deformed or damaged, the end cover will not be able to completely cover the filter, and it will not be able to be tightly fixed.

4.Improper installation:
When installing the filter, if the filter is not installed in the correct direction or if the filter element is operated in the wrong way, there will be a gap between the end cover and the filter element, which will cause the end cover to fall off.


Solution to the end cover falling off of the filter element:

1.Replace the seal ring:
If the seal ring is damaged or aged, you need to replace it with a new one to ensure the sealing effect.

2.Clean foreign matter at the joint:
Check and clean the joint between the filter element end cover and the filter element to ensure that there is no foreign matter stuck.

3.Check the filter element status:
Check whether the filter element is deformed or damaged. If necessary, replace it with a new one.

4.Install the filter element correctly:
When installing the filter element, make sure to follow the correct direction and method to avoid gaps between the end cover and the filter element.