Features
1.Easy installation and connection:
The filter can be directly installed on the side, bottom or upper part of the oil tank, the filter head of the filter is exposed outside the oil tank, the oil suction cylinder is immersed below the liquid level in the oil tank, the oil outlet is provided with pipe type and flange type connection, and the self sealing valve and other devices are set in the filter, so that the pipeline is simplified and the installation is convenient.
2.Convenient to replace, clean filter element or maintain system:
When replacing or cleaning the filter element or maintaining the system, just loosen the end cover of the filter (cleaning cover). At this time, the self sealing valve will automatically close to isolate the oil circuit of the oil tank, so that the oil in the oil tank will not flow out, so that it is very convenient to clean, replace the filter element or maintain the system. If the self sealing valve is opened, it can be used to drain oil from the oil tank.
3.With filter element pollution transmitter and oil bypass valve, the reliability of hydraulic system is improved:
When the filter element is blocked by pollutants and the vacuum degree of the oil outlet is 0.018mpa, the transmitter will send a signal to replace or clean the filter element in time. If the filter element can not be stopped immediately or replaced by no one, the oil bypass valve on the upper part of the filter element will open automatically (the opening value is: vacuum 0.02MPa), so as to avoid the air suction failure of the oil pump. But at this time, the filter element should be replaced or cleaned to keep the cleanliness of the hydraulic system and improve the reliability of the hydraulic system.
